After creating an OmniVista Cirrus Freemium Account or Trial Account, you can upgrade to a Paid Account. To upgrade to a Paid Account, you will need an OmniVista Cirrus Subscription. Subscriptions are ordered through an ALE Business Partner, who will guide you through the process. Once the Subscription is activated, you will receive services and support as described in the OmniVista Cirrus Paid Bundles Service Description for the duration of the Subscription.
After creating an OmniVista Cirrus Subscription with your ALE Business Partner, follow the steps below to upgrade to a Paid Account. The steps must be performed in order.
Note: After you complete the above steps and are up and running with your Paid Account, you can always add/license additional devices. Go the Device Catalog online help for more information. Also note that any devices you may have added/licensed during your Freemium or Trial Account, will be automatically be available as part of your Subscription. Any new devices added as part of your Subscriiption will need to be added to the Device Catalog and Licensed for full management.
If you are already working with a Business Partner and have created a subscription and obtained a Subscription Number, go to Upgrading to enter your number and begin the upgrade. If you do not yet have a Business Partner, follow the steps below to locate a Business Partner.
1. Click on the GET PAID ACCOUNT button at the top of the screen. The Get Paid Account Screen will appear.
2. Click on the "Find a Business Partner" link to locate and contact a Business Partner to set up your OmniVista Cirrus Subscription. The Partner Locator website will appear.
3. Enter a Business Partner Company Name to bring up contact information for a specific company; or click on the Country drop-down list to locate Business Partners in your area. If you are using the Country drop-down to locate a Business Partner, you can select multiple locations. Click on the Search button.
If you entered a specific company, the company will be displayed on the bottom-left side of the screen. If you entered a location(s), a list of companies in that location(s) will be displayed in the bottom-left side of the screen (shown below). You can refine your search using the Market Segment, Region, and Solutions filters.
4. Click on the View Details button for additional company information, or click on the Website button to go to the company website. You can also click on the Phone button to display the company phone number.
After your OmniVista Cirrus Subscription is set up, you will be assinged a Subscription Number and Activation Code by your Business Partner to upgrade to a Paid Account.
1. Log into your OmniVista Cirrus Account and click on the GET PAID ACCOUNT button at the top of the screen. The Get Paid Account Screen will appear.
2. Enter the Subscription Number and Activation Code, accept the "Terms and Conditions", and click on the Activate Now button at the bottom of the screen. The Confirmation Screen below will appear. Note that if you are upgrading directly from a Freemium Account, a field to create a Custom URL will also be presented. If you are upgrading from a Trial Account you will have already created a Custom URL and that field will not be displayed, as shown in the screen above.
Note: Previous releases of OmniVista Cirrus used Subscription Number and End Customer ID to identify a subscription. Release 2.0 uses Subscription Number and Activation Code to identify a subscription. If you purchased a Subscription before the release of 2.0, and have not yet activated it, you can still activate it by entering the "Subscription ID" in the "Subscription Number" field, and "End Customer ID" in the "Activation Code" field.
3. Click on the "Continue to Home Page" link to return to OmniVista Cirrus. You will receive an e-mail from ALE USA Inc (email@example.com) containing instructions when your Paid Account is ready. (It may take a few hours for the Paid account to be processed and the email delivered).
4. Once you receive the email from ALE USA Inc, log out of OmniVista Cirrus. Click on the Go to OmnIVista Cirrus button in the e-mail to open OmniVista Cirrus and log in using the username and password you initially created for your Freemium Account. If you are upgrading from a Freemium or Trial Account and have unlicensed devices, the following screen will appear.
Click on the Set Up Licenses Now button to go to the Device Catalog Screen and license devices for full management. Click on Not Now to go to the Dashboard. You can set up licensing at any time from the Device Catalog Screen (Network - Inventory - Device Catalog). Remember, any devices you added in your Freemium Account will still be in your Device Catalog, but will have limited management until they are licensed.
If you are upgrading from a Trial Account and have already licensed all of your devices, the Dashboard will appear.
Add any new devices included in your Subscription to the Device Catalog. If you do not need to add devices (you added all of the devices you want to manage in your Freemium or Trial Account and did not add any new devices as part of your Subscription), go to Licensing Devices to license the devices for full management.
To add devices, go to the Device Catalog application. For detailed instructions on adding devices, click on the help link (?) on the Device Catalog Screen to bring up the Device Catalog online help.
Note: Remember, before adding a device, make sure the device is running the required software version for OmniVista Cirrus. LAN devices must be running a minimum software version of AOS 22.214.171.124.R03 or 8.4.1.R03. APs must be running a minimum software version of AWOS 3.0.4 MR1. Click here for more information on required device software.
If you have trouble adding devices to the Device Catalog, click here for common problems and troubleshooting tips.
License any new devices included in your Subscription for full management. If you do not need to license devices (you are upgrading from a Trial Account, have already licensed all of your devices and did not add any new devices as part of your Subscription), you can now begin using your Paid Account.
You license devices using the Device Catalog License Wizard. At the top of the Device Catalog Screen (Network - Inventory - Device Catalog), click on the Manage Device Licenses button to bring up the first screen of the wizard (below).
The first time you bring up the wizard, you must set the number of licenses available for each device/service type. For example, you could make 5 of each Device type license available (for a total of 20) and 10 of each Service type license available (for a total of 20), as shown above. The license configurations you specify here will be set for the duration of Trial period. After selecting the number of licenses you want to have available for each device/service type, click on the Next button. The following warning will appear. Click Close.
Click Next. All validated (Registered) devices that you added in your Freemium Account will appear on the left side of the screen with the Device License type displayed underneath the device description. An overview of the number of licenses used for each category is shown at the top of the screen (e.g., E 0/5, A 0/5).
Select the device(s) you want to license by clicking on the Add icon to move the device from the left side of the screen to the right side, then click Next.
The Settings Screen allows you to enable automatic licensing of any devices you add to the Device Catolog in the future. Once a device is Validated and Registered, it will automatically be assigned an available license, saving you the time of manually licensing any new devices. Move the slider to Yes to enable this option. This option can by turned off at any time. Click Next to to review your licensing configuration.
Click Apply. The Assign & Release License - Confirmation Screen will appear, displaying a list of the devices you selected to license.
Click OK. The Default Catalog Screen will open with Pre-Provisioning guidelines at the top of the screen. See Pre-Provisioning Devices for more information.
Note: After initially licensing devices, you can add/remove licenses to/from devices at any time. However, you must restart the activation process on the affected devices (both the devices you add a license to and the devices you remove the license from).
For detailed instructions on licensing devices, click on the help link (?) on the Device Catalog Screen to bring up the Device Catalog online help.
There are different licenses for different device types. When you select a switch in the License Wizard, the applicable license is applied to the device.
As part of the activation process on licensed LAN devices, an initial configuration (e.g., SNMP version, device login/password) is automatically applied to the device. The configuration is contained in a pre-configured Default Pre-Provisioning Template. There is no need to modify the default template (you can modify it later or apply custom templates to devices at any time). If you are only licensing LAN Devices and not APs, go to Starting the Activation Process on Devices.
If you are licensing APs, open the AP Registration application (Network - AP Registration). The "Init Registration App" window will appear. This is used to set certain basic pre-provisioning AP parameters (e.g., Country Code, Trust Status). Complete the fields in the window. This pre-provisioning procedure will only have to be done the first time you open the AP Registration application. The configuration will automatically be applied to any subsequent APs you license.
Note: APs must be “trusted” to be managed by OmniVista Cirrus. The “Trust All” field in the Init Registration App" window is enabled by default. This can be convenient when initially adding a large number of APs. If you would like to exercise administrative intervention before accepting new APs, you might want to click on the Trust All" icon (lock in unlocked position) at the top of the Access Points screen to toggle the setting back to “Untrust All” icon (lock in locked position).
See the Pre-Provisioning application online help for more information on LAN Device and AP Pre-Provisioning. See the AP Registration online help for more information on AP configuration, including "Trusted/Untrusted" APs.
LAN Devices running AOS 6.7.2.R04 (and later) or AOS 8.5R2 (and later), and APs running AWOS 3.0.4 MR1 support the Automatic Call Home Feature. These devices automatically contact the OmniVista Cirrus Server at regular intervals. For these devices, there is no need to manually start or restart the activation process. The devices will automatically contact the OmniVista Server at the configured Call Home interval.
A device must connect to the OmniVista Cirrus Server to complete the activation process. If it is an unconfigured device (a new device, or an old device that has been reset to the factory default configuration), or a device that supports the Automatic Call Home Feature, just connect the device to your network. Otherwise, connect the device to your network (if necessary) and restart the activation process on the device.
Connect the device to your network and power it on. The device will automatically contact the OmniVista Cirrus Server and complete the activation process, if the Network and Device Prerequisites are met.
If the device supports the Automatic Call Home Feature, the device will automatically retry the activation process. Otherwise, restart the activation process on the LAN device or AP as described below. The options for restarting the activation process on a device depend on whether you are adding the device for limited management (unlicensed device) or full management (licensed device).
If you are adding unlicensed devices for limited management, restart the activation process as described below.
When the activation process completes, the Device Status column will display "Registered". If you have trouble activating devices, click here for common problems and troubleshooting tips.
If you are adding licensed devices for full management, restart the activation process as described below.
When the activation process completes, the Device Status column will display "OV Managed". If you have trouble activating devices, click here for common problems and troubleshooting tips.
If you encounter problems adding/licensing devices, the Device Status column in the Device Catalog can be used to troubleshoot the problem. (For a Virtual Chassis, status is displayed in the VC Device Status column.)
Unsupported Device Model
The device is not supported in OmniVista Cirrus.
Failed Device Validation
You may have entered an incorrect serial number of MAC address. Check the Serial Number or MAC address (AP). Edit the information, if applicable, and restart the activation process on the device.
Waiting for First Contact
If you are adding a Device to the Device Catalog and the device remains in this state (rather than moving to "Registered"), verify that you have met all of the Network and Device Prerequisites. If necessary, make any needed configuration changes. Otherwise, restart the activation process on the device.
If you are licensing a device and it remains in this state (rather than moving to "OV Managed"), restart the activation process on the device.
Any Other Status
Click on the Help Link (?) on the Device Catalog Screen to go the Device Catalog online help for a completed list of status definitions and troubleshooting tips.